Skip to content

Pheromones and Traps for Monitoring Pests in Berry Production

November 22, 2026
Pheromones and Traps for Monitoring Pests in Berry Production

Introduction: Why is monitoring important?

Berries are high-value crops where even minor pest damage can result in fruit being downgraded or rejected, leading to significant financial losses. This means that even relatively low pest populations can have a considerable impact on marketable yield.

Effective pest monitoring is therefore an essential part of an integrated pest management (IPM) program. Regular scouting, combined with traps and pheromones, allows growers to identify pest activity, detect sudden increases in populations and evaluate whether their current control strategies are working.

Although physically inspecting plants remains essential, traps and pheromones provide a quick and practical way of monitoring specific pests. They can also help identify pest migration into a crop before significant damage becomes visible.

Challenges of monitoring in berry production

Monitoring berry crops can be particularly challenging due to the precision required and the large areas that need to be covered. Different varieties, production blocks and growing conditions can all influence pest populations.

Furthermore, many important pests spend part of their life cycle in locations that are difficult to inspect, such as inside flowers, growing points or developing fruit. This makes it difficult to obtain an accurate picture of pest pressure through visual scouting alone.

A combination of scouting and trapping provides a more complete understanding of what is happening in the crop.

How should berries be monitored?

The number and location of monitoring points will depend on the size of the production area, crop layout and pest pressure. Generally, more monitoring points provide better information, but they also increase labour, management and monitoring costs.

As a practical starting point, consider the following monitoring layout for each production block:

  • 12 scouting points: Spread evenly throughout the block to assess pest numbers, distribution and life stages.
  • 4-5 trap-monitoring points: Ideally positioned around the block, with one on each side, to help identify pest activity and potential migration.

Scouting and trapping provide different but complementary information:

Scouting

  • Identifies the pest and its life stage (eggs, larvae, pupae and adults).
  • Provides an indication of actual pest pressure within the crop.
  • Helps identify hotspots and assess crop damage.
  • Allows growers to monitor the effectiveness of biological and chemical control strategies.

Traps and pheromones

  • Help detect the arrival or migration of specific pests.
  • Provide an indication of changes in adult pest populations.
  • Allow growers to monitor population trends over time.
  • Help identify when additional scouting or control measures may be necessary.

It is important to understand that most pheromones and traps are highly pest-specific and often target only a particular life stage or sex. For example, a pheromone may attract only adult male moths. Consequently, trap catches do not always represent the actual pest population or damage occurring in the crop.

Main pests in berry production

Berries are affected by several important pests, including lepidoptera, fruit flies, whiteflies, red spider mites, thrips and leafhoppers. Unfortunately, not all these pests can be monitored using pheromones or traps.

However, several useful monitoring tools are available for some of the most important insect pests.

Types of pheromones and attractants

Before looking at individual pests, it is useful to understand the different types of attractants used in pest monitoring.

  • Sex pheromones: Chemical signals released by insects to attract individuals of the opposite sex. These are commonly used to attract the male and monitor adult populations.
  • Kairomones: Chemical signals that attract insects because they indicate a suitable food source or host. These can attract one or both sexes, depending on the attractant.
  • Colour attraction: Certain insects are naturally attracted to specific colours. Yellow and blue sticky traps are commonly used to monitor flying pests such as whiteflies, thrips and leafhoppers.

Bollworm

Bollworm (Helicoverpa armigera) can be a devastating pest in berry production. The larvae feed on flowers, vegetative growth and developing fruit, with even a single caterpillar capable of causing considerable damage.

Monitoring eggs and young larvae can be challenging due to their small size and their tendency to hide within the crop. Larger larvae are easier to identify, but by this stage significant damage may already have occurred. Furthermore, established larvae can be difficult to control, making early detection particularly important.

Monitoring the adult moth population provides an opportunity to identify potential increases in pest pressure before significant larval damage occurs.

Two commonly used trap options are:

  • Delta traps: Suitable for monitoring moth activity using pheromone lures.
  • Funnel traps: Useful for capturing larger numbers of moths and can be used with suitable pheromone lures.

Different pheromone options are available, including sex pheromones that attract male moths and attractants designed to attract both males and females.

Monitoring adult populations should always be supported by regular crop scouting to identify eggs and larvae.

Fruit flies

Fruit flies are particularly concerning in berry production because the eggs and larvae develop inside the fruit, making infestations difficult to identify before harvesting.

Two important examples are spotted wing drosophila (Drosophila suzukii) and Mediterranean fruit fly (Ceratitis capitata).

Spotted wing drosophila (SWD)

SWD is a particularly important pest because females can lay eggs in ripening and ripe fruit. The larvae develop inside the berries, potentially making the fruit unmarketable.

Drososan traps combined with the Pherodis SWD attractant can be used to monitor adult activity. The attractant is designed to attract female SWD, helping growers identify whether the pest is present and monitor changes in population levels.

Mediterranean fruit fly

Mediterranean fruit fly can also damage berries through egg laying and larval development inside the fruit.

Pherodis Ceratitis capitata can be used with a Moskisan or suitable Delta trap to monitor adult fruit fly activity.

As with SWD, monitoring should be combined with fruit inspections to establish whether eggs or larvae are present.

Thrips

Thrips are common pests in berry production and can cause damage to flowers, leaves and developing fruit. Although adults and juveniles can be identified through crop scouting, monitoring can become challenging because thrips often shelter inside flowers and growing points.

Thrips can also migrate into berry production areas from surrounding vegetation and other crops.

Yellow or blue Horiver sticky cards and rollertraps can help monitor adult thrips activity. An increase in trap catches can indicate increased pest activity or migration into the crop, signalling the need for more intensive scouting.

It is important to remember that sticky traps mainly capture flying adults and do not provide a indication of the juvenile population within the crop.

Mass trapping

In addition to monitoring, certain traps and pheromone systems can be incorporated into an IPM programme for mass trapping.

Mass trapping involves using a sufficiently high density of traps to capture large numbers of a target pest, with the aim of reducing its population and limiting reproduction.

This can be a useful additional management tool for certain pests, particularly when used early and consistently. However, its effectiveness depends on the pest species, trap density, attractant, surrounding pest pressure and crop conditions.

Mass trapping should complement, rather than replace, other IPM strategies.

Summary of traps and pheromones for berry pests

Target pestPheromone / attractantTrap
Bollworm (H. armigera)Pherodis H. armigera / TV LureFunnel / Delta
Spotted wing drosophilaPherodis SWD and Fruitfly attractantDrososan
Mediterranean fruit flyPherodis C. capitataMoskisan / Delta
LeafhoppersYellow colour attractionHoriver cards / rollertraps
ThripsYellow or blue colour attractionHoriver cards / rollertraps
WhitefliesYellow colour attractionHoriver cards / rollertraps

Understanding pest thresholds

Pest thresholds are useful tools for determining when additional control measures may be necessary. However, establishing a reliable threshold for berry production is not always straightforward.

Thresholds depend on several factors:

  • Pest species: Different pests cause different levels of damage and have different reproductive rates.
  • Crop sensitivity: Flowers, developing fruit and harvest-ready berries may have different levels of susceptibility.
  • Market requirements: Fresh-market berries often have very low tolerance for pest damage or contamination.
  • Environmental conditions: Temperature and humidity influence pest development and population growth.
  • Monitoring method: Trap catches and scouting counts measure different aspects of pest populations and cannot necessarily be compared directly.

There is therefore no single threshold that can be applied to every berry farm.

How should growers establish their own thresholds?

The most practical approach is to build a farm-specific monitoring database by consistently recording scouting results, trap catches and the damage observed in the crop.

Over time, this information can help growers identify the pest levels at which damage starts to increase and when control measures should be implemented.

Trap catches should be interpreted as an early-warning indicator rather than a direct treatment threshold, unless a reliable relationship between trap catches and crop damage has been established. Ultimately, monitoring data should be linked to what is happening in the crop. In high-value berry production, early intervention is often preferable to waiting for visible damage.

The goal is not simply to count pests, but to understand how pest populations are developing and make informed management decisions before marketable yield is affected.

Need help?